Embed your application into the rugged and proven PIC16F microcontroller. The board includes 2 crystals for Low power RTC and stable high speed CPU.

Use the PicKit to program your board in C.
Our library makes your work easier, available on GitHub at this address:

GitHub: PIC16F (carte MCU8-80-28-MCP board)

Synthesis

MCU boardsocket DIP-28 microcontroler PIC16F876 / PIC16F886
2 clocks, GPIO peripherals, analog input, I2C serial com
Voltage rugulator

Easy to connect thanks to the FPC port.

This MCU module features

• PIC16F876 or PIC16F886 micro-controller
  
• 5 I/O ports
• 7 test points
• 2 supply sources

Direct interface with modular I/O boards (relays, GPIO, ...) or any external peripheral.

The FPC bus provides supply and I2C signals allowing to make a look with a
power supply, MCU/CPU and multiple boards on a single bus.

Memory

• 14k Flash
• 368 bytes data memory
• 256 bytes EEPROM data memory
  

Clocks and peripherals

• 8 MHz crystal clock (+/-20ppm)
• 32768 Hz RTC crystal (+/-20ppm)
• 5 analog inputs
• 7 digital outputs
• 1 ICSP programming port
• 1 I2C serial com
• 1 USART serial com
• 2 FPC ports
  

Other peripherals

• 14 sources interruption
• 3 timers
• 1 PWM output

Electrical specifications

• Supply source jack 7...15V
  
• Supply source by FPC bus 5V
  
• 5V pins I/O
• 25 mA port pins
• 3.3V I2C level

Detailed informations

MCU 8/80-28-MCP module is designed to serve as a hub between attached peripherals and an external controller,
or as a standalone controller.

This module detects, scans, reads and writes its attached peripherals and can provide a central point for accessing
data and controlling many peripherals. It is equiped with a 32 hHz RTC for real time applications and 8 MHz crystal
for CPU. Its real time clock enables time-stamp or programmed events. It can enter sleep mode for reduced power
consumption when operated on battery.

Documentation Software and Downloads

This MCU module is delivered with the open-source demo firmware.
Source code is available from Github:

Firmware MCU8-80-28-MCP_microcontroller