MCU boardsocket DIP-28 microcontroler PIC16F886
2 clocks, GPIO peripherals, analog input, I2C serial com
Easy to connect thanks to the FPC port.
This MCU module features
- PIC16F886 micro-controller
- 5 I/O ports
- 7 test points
- 2 supply sources
Direct interface with modular I/O boards (relays, GPIO, ...) or any external peripheral.
The FPC bus provides supply and I2C signals allowing to make a look with a
power supply, MCU/CPU and multiple boards on a single bus.
- 14k Flash
- 368 bytes data memory
- 256 bytes EEPROM data memory
Clocks and peripherals
- 8 MHz crystal clock (+/-20ppm)
- 32768 Hz RTC crystal (+/-20ppm)
- 5 analog inputs
- 7 digital outputs
- 1 ICSP programming port
- 1 I2C serial com
- 1 USART serial com
- 2 FPC ports
- 14 sources interruption
- 3 timers
- 1 PWM output
- Supply source jack 7...15V
- Supply source by FPC bus 5V
- 5V pins I/O
- 25 mA port pins
- 3.3V I2C level
MCU 8/80-28-MCP module is designed to serve as a hub between attached peripherals and an external controller,
or as a standalone controller.
This module detects, scans, reads and writes its attached peripherals and can provide a central point for accessing
data and controlling many peripherals. It is equiped with a 32 hHz RTC for real time applications and 8 MHz crystal
for CPU. Its real time clock enables time-stamp or programmed events. It can enter sleep mode for reduced power
consumption when operated on battery.
Documentation Software and Downloads
This MCU module is delivered with the open-source demo firmware.
Source code is available from Github:
MCU8/80-28-MCP module 8 bits 8 MHz 28 pins microcrocontroller
- Brand: Chrysalide Engineering
- Product Code: MCU8/80-28-MCP
- Availability: In Stock
- Ex Tax: 19.00€